This is a read-only archive. Find the latest Linux articles, documentation, and answers at the new Linux.com!

Linux.com

Feature: Programming

Remote cross-target debugging with GDB and GDBserver

By Avi Rozen on November 28, 2007 (9:00:00 AM)

Share    Print    Comments   

In theory, GDB, the GNU debugger, can ease the chore of debugging applications running on a Linux-based embedded system. In practice, setting up GDB for this task is a bit of a challenge; it takes some work, and there are some technical hurdles to overcome. However, the benefits of having a way to methodically debug a program instead of guessing what's wrong with it far outweigh the effort involved. Here are some tips for easing the difficulties.

Rather than run a full-blown instance of GDB on the target platform, you can use GDBserver, a program that lets you run GDB on a different machine than the one on which your program is running. The advantage of using GDBserver is that it needs just a fraction of the target resources that GDB consumes, because it implements only the low-level functionality of the debugger -- namely setting breakpoints and accessing the target processor registers and read/write application memory. GDBserver takes control of the application being debugged, then waits for instructions from a remote instance of GDB running on a development workstation.

Typically, the development workstation has a different processor (say, an i686 class processor) than the target platform (which may be ARM, PowerPC, or something else). This means you can't simply use the GDB executable that's installed on the workstation -- you want a cross-target debugger. In other words, you have to custom-build GDB from source code.

Building GDB

The following example uses a 7450 PowerPC as the target processor.

Before you begin, you need a communication interface between the PC running GDB and the target platform: either a serial link or, preferably, an Ethernet network connection. You also need a cross-target toolchain: a GNU C compiler (together with a C run-time library and binary utilities, a.k.a. binutils) that runs on the development workstation and generates executables for the target processor. You will build two sets of binaries from the GDB source code:

  • cross-target -- where the host is the development workstation and the target is the target processor
  • native -- where both host and target are the target processor

First download the GDB source code compressed archive, and unpack it:

  mkdir -p ~/work/cross/gdb/downloads
  cd ~/work/cross/gdb/downloads
  wget http://ftp.gnu.org/gnu/gdb/gdb-6.7.1.tar.bz2
  cd ..
  tar xvjf downloads/gdb-6.7.1.tar.bz2

The GDB source package uses the GNU build system, where generating binaries is usually just a few commands away (./configure ; make ; make install). But in our case it's a bit tricky: we intend to build binaries for two different host processors, and install the binaries at different locations. So we'll build the binaries in their own directories, instead of the directory into which we unpacked the source package. Furthermore, we'll use the configure script's command-line options to specify the target and host processors, and the installation directory prefix.

To build the cross-target binaries, specify the target architecture with the --target option. The architecture identifier (here powerpc-7450-linux-gnu) is the prefix of all the cross-toolchain binaries (here the cross compiler binary is powerpc-7450-linux-gnu-gcc).

  mkdir -p ~/work/cross/gdb/build/host_x86
  cd ~/work/cross/gdb/build/host_x86
  ../../gdb-6.7.1/configure --prefix=/opt/gdb/powerpc-7450-linux-gnu/cross --target=powerpc-7450-linux-gnu
  make
  make install

Building the target-native binaries is trickier. For one thing you need to specify the host architecture (same as the target architecture powerpc-7450-linux-gnu). Another issue is missing libraries -- some libraries may not be available in the cross-toolchain, and must be built before you try to build a target-native GDB. This example shows how to succeed when you find a target-native termcap library is missing (cross building is somewhat different here -- use ./configure --help when in doubt):

  cd ~/work/cross/gdb/downloads
  wget ftp://ftp.gnu.org/gnu/termcap/termcap-1.3.1.tar.gz
  cd ..
  tar xvzf downloads/termcap-1.3.1.tar.gz
  mkdir -p ~/work/cross/gdb/build/termcap
  cd ~/work/cross/gdb/build/termcap
  
  export CC=powerpc-7450-linux-gnu-gcc
  export RANLIB=powerpc-7450-linux-gnu-ranlib
  ../../termcap-1.3.1/configure --host=powerpc-7450-linux-gnu --prefix=$HOME/work/cross/termcap
  make
  make install

One last issue to consider is whether the binaries should be statically linked. This is required if the target platform is missing some of the shared libraries that GDB and GDBserver depend on for normal operation, but the resulting executables are much larger than dynamically linked ones. You can specify static linking by adding the option -static to the LDFLAGS environment variable before running configure. Any additional library should also be specified in both LDFLAGS and CPPFLAGS, as follows:

  export LDFLAGS="-static -L$HOME/work/cross/termcap/lib"
  export CPPFLAGS="-I$HOME/work/cross/termcap/include"
  ../../gdb-6.7.1/configure --prefix=/opt/gdb/powerpc-7450-linux-gnu/native --host=powerpc-7450-linux-gnu --target=powerpc-7450-linux-gnu
  make
  make install

The GNU linker will issue some warnings during the build process. Using some functions (for instance dlopen, gethostbyname, and a few more) in statically linked applications requires at runtime the shared libraries from the GNU C runtime library version used for linking. You may have to install these libraries on the target platform.

Once you've generated the GDBserver executable, copy it to the target platform. You can save some storage space by stripping all the debug information from it first, using the powerpc-7450-linux-gnu-strip utility.

Adapting the build procedure for a different target processor should only be a matter of using a different architecture identifier.

Usage

To facilitate debugging, you must compile an application with debug information by providing the -g command line option to the compiler/linker. The resulting executable file may be too big to fit into the storage space available on the target platform, so before moving it there you can strip the debug information from a copy of it using powerpc-7450-linux-gnu-strip, and place the stripped copy on the target platform. The stripped version is to be run with GDBserver on the target platform, and the non-stripped copy is to be loaded into GDB on the development workstation.

Remote debugging is rather straightforward: on the target platform, launch the application with GDBserver, while specifying the host and port for listening to an incoming TCP connection:

  gdbserver HOST:PORT PROG [ARGS ...]

On the development workstation, launch the cross-target GDB:

  powerpc-7450-linux-gnu-gdb PROG

Be sure to specify the non-stripped executable. At the GDB console, type:

  target remote HOST:PORT
  break main
  continue

These commands will connect GDB to the GDBserver running on the target platform, set a breakpoint at the start of the program, and let it run until it reaches that first breakpoint.

You can also attach GDBserver to a process that's already running:

  gdbserver HOST:PORT --attach PID

The process is then stopped, and you can then debug it with a remote GDB.

GDB commands work as expected while debugging a remote application, with a few exceptions -- most notably, the run command isn't used, since the program is already running when you start the debug session. Another quirk is that if the program is allowed to continue until it exits, then the remote GDBserver will exit too, and the remote session will terminate.

Setting up a working remote debugging environment may seem like too much of hassle to some -- "after all, nothing beats a well placed printf." But with GDB you can both trace and modify code and data flow, and otherwise analyse the behaviour of your code, without explicitly changing any of it. It doesn't magically solve bugs, but it sure helps.

Avi Rozen is a senior R&D engineer at a company that develops machine-vision-based products.

Share    Print    Comments   

Comments

on Remote cross-target debugging with GDB and GDBserver

Note: Comments are owned by the poster. We are not responsible for their content.

gdb + ssh?

Posted by: Anonymous [ip: 169.233.25.231] on November 28, 2007 04:24 PM
How is the remote cross-target debugging any better than just gdb on a bunch of virtualized machines accessible through ssh, vnc, nx, etc.?

#

Re: gdb + ssh?

Posted by: Anonymous [ip: 204.137.64.112] on November 28, 2007 08:54 PM
This will allow you to debug low memory embedded systems while only using its processor an ram. Otherwise you would have to install gdb on the embedded system. This saves hard disk space on the system with a small hard disk.

#

Re: gdb + ssh?

Posted by: Anonymous [ip: 71.207.161.72] on November 29, 2007 12:58 PM
The key word is embedded. With embedded system it is often the case you will need to debug using the actual hardware. Often code will need to interact with a FPGA, circuit or custom driver and there is no practical substitute for the real thing.

#

Remote cross-target debugging with GDB and GDBserver

Posted by: Anonymous [ip: 78.1.106.167] on November 28, 2007 09:51 PM
Great article, this will make me compile gdb for my PowerPC MPC8241 where full gdb would be a problem with only 32 Mb of RAM.

Thanks for sharing this, I would love to see more articles about embedded Linux development like this.

#

Qemu

Posted by: Anonymous [ip: 91.122.49.61] on November 29, 2007 07:49 PM
Qemu has built-in GDB-server too.

#

This story has been archived. Comments can no longer be posted.



 
Tableless layout Validate XHTML 1.0 Strict Validate CSS Powered by Xaraya